Date: January 24th 2010

I'm coming in a little late on this so I don't know if it's been solved or not. I've
read a few of the posts, but, I didn't see anyone mention the upper rubber
isolation mount and pivot at the top of the front struts. I wouldn't necessarily
expect a vibration at low speed but I've seen weirder things. It's also a PITA
to check since you have to releive the spring pressure to test for movement.


Jim Berry
=================================================
----- Original Message -----
From: "David" <ainut@hiwaay.net>;
To: <fastmax@cox.net>;
Sent: Saturday, January 23, 2010 11:20 AM
Subject: [Team3S] Re: troubleshoot my vibration!


> Did you lose a weight on one of the drive shafts? Wheel bearing was the
> first thing that came to mind, though.
>
> David M.
>
>
>
> jt@jthorns.com wrote:
>> Hi All,
>> I have a vibration problem that I can not identify, and am hopeful that
>> someone here can help.
>> It seems to be coming from the front right (pass) wheel area. Starts
>> as a hum/vibration at a low frequency, and as the car slows to a stop
>> becomes more violent, more of a shaking. Only shows up at low speed,
>> e.g. when coming to a stop. It is the same either if coasting to a stop
>> or with brakes applied. Any speed over about 20 mph and it's not there.
>>
>> I was sure it was the CV, so I replaced that. Then I thought it was the
>> wheel bearing/hub, so I replaced that. The problem is still there. The
>> transfer case oil was clear, with no bits of metal on the drain plug.
>>
>> Any clues?
>>
>> HELP!
>>
>> Thanks,
>> John
>>
>> To Unsub, please visit http://www.Team3S.com/Rules.htm
>>
>
> --
> To Unsub, please visit http://www.Team3S.com/Rules.htm


--------------------------------------------------------------------------------



No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 9.0.730 / Virus Database: 271.1.1/2640 - Release Date: 01/23/10 01:33:00